Thursday, September 26, 2013

Invitations: Tulip Wedding

Here are some wedding invitations that I sent off today. I did the engagement invitations for the same couple and they requested something similar but with the colour scheme changed from purple and silver to red and silver. 


The wedding ceremony is at Araluen Botanical Park, which is known for its tulips, so as I again didn't have any specific guidelines for what to design, I went went with a tulip theme. They'd requested that the invitations be 'romantic' but also 'fun' so I typeset on an angle so as to be a bit less formal, and used Americana BT for the font, as with the engagement invitations. I used the text monogram from the engagement invitations to tie everything together. 

As wedding invitations need to look a bit more luxe, I used embossing powder to emboss all the monograms. I went out an got some embossing pens, but most annoyingly they didn't work on the paper (Canon high resolution paper) – the ink dried instantly, presumably due to the coating, so the powder had nothing to stick to; I was forced to return to using glue, which works but results in a more crackly finish than the embossing pens. (Fortunately I plan to emboss this year's Christmas cards, and the pens do work on that cardstock. They will not be wasted!)

52 invitations and 52 rsvp slips are quite a lot to emboss, but I think it was worth it, they catch the light very nicely. 


Typesetting in Adobe inDesign CC, Illustration in Adobe Photoshop CC, all hand assembled. 

Sunday, September 22, 2013

Sketches and Sneak Peeks

Long time no post! I've been pretty flat out – for a couple of weeks all I was doing was waiting for work that was supposed to materialise, and then it all arrived at once, several projects within three days of each other! However, to prevent my blog from completely stagnating, here are some sketches I did a while ago, as rewards for working all day:


Mucking about with personifying my dog, Myrna – she's a cavoodle, so a mix of King Charles Cavalier and Poodle (hence the costume).
Manga Studio 5, 30 minutes to sketch, 30 minutes to colour.


A sketch of Eustacie in Georgette Heyer's The Talisman Ring, which I was listening to at the time. 
Manga Studio 5 and Photoshop, 30 minutes to sketch, 30 minutes to colour.


And here's a little peek at a few of the things I'm working on, which is currently ranging from portraiture to advertising to educational publishing to wedding invitations to Christmas cards. Plus a graphic novel test that I was putting together while waiting for work to arrive. I don't think anyone can say that I'm not versatile! =P

Saturday, August 17, 2013

Illustration: Read Across the Universe

It's Children's Book Week here in Australia, and the 2013 theme is Read Across the Universe so I created a colouring page specially for it. I liked the result and decided that it would make a fun portfolio piece, so I coloured it up into a full illustration:


You can grab the colouring page from the colouring page section of my website (which will also take you to a number of other colouring pages) or by clicking on the thumbnail below


As usual, I am providing high-quality colouring pages for private home or school use. Have lots of fun with them, but please don't use them commercially or distribute them without my logo and web address on. =)

Here's a progress animation of the creation of this piece: 


To start with I created some rough pose references in Manga Studio 5. I've just started using this programme and the 3D drawing references are very handy, especially when it means I don't have to try and recreate weightlessness while photographing a live model. 
Once I had my models roughly where I wanted, I drew right on top of them until I have a very rough sketch. 
I took this rough sketch into Photoshop, and refined it a bit before printing it out. 
Using my refined sketch as a guide I drew a tight pencil layout using pencil on layout paper.
I scanned this in and inked it digitally using photoshop. 
And then I coloured it, first laying down flat colours and then adding shading and colouring the linework. 

Adobe Photoshop CS6 with a Wacom Intuos 3

Monday, August 12, 2013

Illustrations: Baby Cards

Here are a couple of pictures I did for some baby cards. My cousin has just had her first baby, a gorgeous little girl called Mary, so I did a design for a card for her, and then one in the same vein to congratulate the new grandparents.

I wanted something a bit retro, so I looked to 50s artists, especially Retta Scott's Golden Book version of Disney's Cinderella. I used some sort of pastelly live brush in Photoshop to get the chalky texture. 


This card used the 1805 version of 'Rock-a-bye Baby' on the front and inside.

Rock-a-bye baby
Your cradle is green
Father's a nobleman
Mother's a Queen

Which seemed a bit less confronting than the usual version, especially for very new first-time parents! 

The Grandparents card was a bit of an afterthought. My mother wouldn't let me use the same illustration, and I had a lot of work on, so to speed things up I swiped the pram from some baby shower invitations I did last year and drew over that with my chalky brush, and altered the face of my original baby a bit. 


Adobe Photoshop CS6 with a Wacom Intuos 3. 

Saturday, August 3, 2013

Needle felting: Mice

Contrary to appearances, I am not dead! There may have been times over the last month when I wished I was, because sometimes life/work/the world does that to us, but I've managed to survive July relatively unscathed and now that it's August I'm back with some felted mice.

I posted a sneak peek of this as part of a sketchdump back in May but only finished it recently. Back then there was just one mouse, but I always intended there to be three. I could probably go back and tighten up some areas, but I think it's time to call it done:


A shot with my hand, to show size.

And a rotation, because plump mouse bottoms need to be seen at every angle. =P


And finally a shot from above:


Merino & Corridale wool with what I assume are #32, #36 and #38 felting needles. 

Monday, July 8, 2013

Needle Felting: Tawny Frogmouth

This was a gift for one of my honorary Aunties. She loves owls, especially tawny frogmouths, which are a type of owl here in Australia, and asked if I would felt one for her. 

Here we have it in its natural habitat, blending in rather well. A real tawny frogmouth can camouflage itself to look like a branch, but they're much cuter when they're fluffy. 





Apart from the eyes and beak, everything is felted with only a beige-brown and black, and I did my best to create the illusion that I had more colours by mixing the two. 
This is felted a bit more loosely than my usual projects – I usually have very solid final products, but I wanted a hairier, softer result this time. 


It's not very large and sits comfortably in hands or on a desk:




I took some progress shots with my phone while working on this project, so here's a compilation. See below for an explanation if you want more detail:


I started out making an armature for the feet with copper wire, and then felted them and attached a mound of core wool on the top for the body. I'd joined the feet together with a horizontal stretch of wire, so I could easily attach them by felting around this without the need for glue. 

I then started covering the core wool with brown, and added some extra height. After that I had to start on the face because I always like to have a face done while I'm working; I find it easier to create around a face than to later try and match a face to everything else. It looked a big creepy for a while there, but eventually I ended up with something cute. 

I then turned to the back view and added a tail and wings, which I felted separately and then attached. 

I had a monkish owl for a while as I felted a couple of layers of individual feathers and then covered the remainder of the owl with unfelted hanks of roving, which I rooted in, starting at the bottom and working up towards the top and centre. After that all that was left to do was to trim the furry bits and attach the flyaway eyebrows a bit more. 

Wednesday, June 26, 2013

Sketch dump

Here's a quick portrait I did of Mick Aston, Time Team archeologist, who died yesterday. I love Time Team, such a shame it was cancelled, and also a shame that he died so relatively young. Time Team is one of those shows that teaches a lot without requiring massive concentration (perfect for those times it's on tv when I have to cook dinner at the same time =P) and I've always found the archeology very interesting, although I admit I first started watching because of Victor Ambrus' truly gorgeous illustrations (also a crying shame that those were dropped in the final couple of seasons). 


Photoshop CS6 with a Wacom Intuos 3, about an hour and a half.
This was a good opportunity to try out whiskers in this lasso-and-shade style. 

And here are some recent pages from my sketchbook:

A very quick sketch (15 minutes) of Queen Victoria in her wedding dress, from an 1847 portrait by Franz Winterhalter:


A sketch inspired by a mother and daughter I saw queuing for Japanese:


And a couple of kids that were at my cousin's baby shower:


All of those are 0.5 #B mechanical pencil in a Moleskine Skethbook.

LinkWithin

Related Posts Plugin for WordPress, Blogger...